Opis
Aqua Master Tools P50 pro pH temp electrode
This replaceable electrode is suitable for the P50 Pro pH Temp meter . The electrode is IP67 waterproof when attached onto the meter. Please refer to our User Manual for instructions on how to replace the electrode or check out the how-to video.
Electrode Replacement Procedure:
Begin by unscrewing the sealing ring located at the bottom of the meter.
Gently remove the old or defective electrode by pulling it out.
Carefully position the new electrode, ensuring that the connectors align correctly to prevent any damage to the meter or electrode. Make sure it fits snugly in place.
Verify that the rubber seal is correctly positioned.
Securely tighten the sealing ring.
Follow the calibration instructions provided in this manual to calibrate the meter.
Your meter is now ready for use with the new electrode properly installed.
