Opis
30m drip irrigation set, 30 drippers + Timer
The set allows you to build your own original irrigation set tailored to your individual needs.
The accessories kit requires a 6mm tubing
Perfect for greenhouses!
The kit includes: 1X Hose 30m, diameter 6mm 30x drippers with adjustable flow (6mm connection) 1X hose punch (makes 6mm holes (compatible with the drippers included) 2X Adapter to 6mm 1/4 “(Adapters should be connected to the splitter included in the kit) 30X pin for 6mm hose (The pin allows for easier hose installation) 1X divider 3cm 3/4 “to 6mm 1/4”. (The manifold is installed directly in the tap) 5X end plug for 6mm hose (The plug allows you to stop / close the water circuit at the end of the hose so that no water runs out of the end of the hose ) 1X tape to insulate the joints (Used to insulate the connection between the individual elements 5X elbow 6mm (The elbow allows you to change the direction of the tubing by 90 degrees without bending the tubing) 30X T-connector for 6mm (The connector allows the hose to branch out) |
Water Timer – irrigation system programmer
Has a safety valve that automatically shuts off when the battery is low.
Water Timer is highly weather resistant, dial with fully enclosed dial. Powered by two 1.5V AAA alkaline batteries (not included), low energy consumption (all season, minimum working time without changing batteries).
Specifications:
- Designed for outdoor use with cold water only.
- Working water pressure: 0 – 110 PSI / 0 – 7.5 bar
- Operating temperature: Keep from freezing – maximum temperature: 43 ° C
- Connection: ¾ male / female tap / hose connector (includes required connectors)
- F 3/4 inlet “female thread
- M 3/4 outlet “external thread
- Dimensions: 11 x 10 x 16.5 cm
- <span style = “
